BLAG

BLAG Forums
It is currently Thu Dec 18, 2014 10:37 am

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: jpilot on BLAG 89K
PostPosted: Fri Jun 13, 2008 2:20 am 
Offline

Joined: Thu Jul 13, 2006 5:01 pm
Posts: 509
Location: Boston, MA, USA
I've copied the /etc/udev/rules.d/10-visor.rules file from my BLAG 70K system to my 89K system, after which it stopped working. Here is the file:

Code:
[root@tulum]# cat 10-visor.rules
BUS=="usb", SYSFS{product}=="Palm Handheld*", KERNEL=="ttyUSB*", MODE=="0666", SYMLINK+="pilot"


Here is the relevant text from /var/log/messages:

Code:
Jun 12 21:56:17 tulum kernel: usb 4-1: USB disconnect, address 22
Jun 12 21:56:17 tulum kernel: usb 4-1: new full speed USB device using uhci_hcd and address 23
Jun 12 21:56:18 tulum kernel: usb 4-1: configuration #1 chosen from 1 choice
Jun 12 21:56:18 tulum kernel: usb 4-1: New USB device found, idVendor=0830, idProduct=0061
Jun 12 21:56:18 tulum kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
Jun 12 21:56:18 tulum kernel: usb 4-1: Product: Palm Handheld
Jun 12 21:56:18 tulum kernel: usb 4-1: Manufacturer: Palm, Inc.
Jun 12 21:56:18 tulum kernel: usb 4-1: SerialNumber: PalmSN12345678


No errors per se, but the sync consistently times out. :^(


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 13, 2008 3:05 am 
Offline
Site Admin

Joined: Sun Mar 14, 2004 3:17 pm
Posts: 4492
Location: Loveland, Colorado, USA
Ok, well the path to the device may have changed, but i didn't see it in your /var/log/messages output.

See if something like `lsusb` can find the correct /dev for it then update your visor udev script. Was the original visor script done by you or from f7?


Something like this should *really* be reported upstream as it is usually a pretty easy one line fix for them and helps tons. (like after we figure it out)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 13, 2008 11:41 pm 
Offline

Joined: Thu Jul 13, 2006 5:01 pm
Posts: 509
Location: Boston, MA, USA
I pulled this config file from my BLAG 70K partition, but I believe I found the magic formula on the Fedora Forum, where I definitely should have posted first. I will do that right now and post the resolution once I get it.


Top
 Profile  
 
 Post subject: Resolved
PostPosted: Sat Jun 14, 2008 1:21 am 
Offline

Joined: Thu Jul 13, 2006 5:01 pm
Posts: 509
Location: Boston, MA, USA
Interestingly, I found a resolution by running "gnome-pilot", which showed the device to be "usb:" instead of /dev/pilot. I got rid of 10-visor.rules, changed the "serial device" under jpilot Preferences from /dev/pilot to usb: and the sync worked perfectly.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 14, 2008 12:12 pm 
Offline
Site Admin

Joined: Sun Mar 14, 2004 3:17 pm
Posts: 4492
Location: Loveland, Colorado, USA
ah cool :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group