BLAG

BLAG Forums
It is currently Sat Dec 20, 2014 12:15 am

All times are UTC




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Tue Jul 26, 2005 2:04 am 
Offline

Joined: Thu Sep 30, 2004 3:30 am
Posts: 40
Hi all!!!

I am trying to setup my canon FB330P (it is on the supported list) my xsane and xsane-backends are fairly updated according to synaptic. I tried looking for more updated rpm but found non for FC3

when i run xsane it will scan for a supported device then gives up saying no device available

anybody have this problem before?

hope to here from you soon

regards

_________________
There is a reason for everything, just look closer.

jBarry


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 26, 2005 2:16 am 
Offline

Joined: Thu Sep 30, 2004 3:30 am
Posts: 40
dmesg returns this

parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Trying to free free DMA3
pnp: Device 00:0e disabled.
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4084 buckets, 32672 max) - 360 bytes per conntrack
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
pnp: Device 00:0e activated.
parport: PnPBIOS parport detected.
pnp: Device 00:0e disabled.
lp: driver loaded but no devices found
audit(1122296135.619:0): avc: denied { create } for pid=4021 exe=/usr/sbin/winbindd name=secrets.tdb scontext=user_u:system_r:winbind_t tcontext=user_u:object_r:samba_etc_t tclass=file
eth0: no IPv6 routers present
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized i915 1.1.0 20040405 on minor 0:
mtrr: base(0x88020000) is not aligned on a size(0x300000) boundary
mtrr: base(0x88020000) is not aligned on a size(0x300000) boundary
ppdev: user-space parallel port driver
ppdev0: no associated port!
mtrr: base(0x88020000) is not aligned on a size(0x300000) boundary
mtrr: base(0x88020000) is not aligned on a size(0x300000) boundary


Hope this helps... it seems to be ask everytime a device 'bonks' thou i don't understand any of it

peace

_________________
There is a reason for everything, just look closer.

jBarry


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 26, 2005 3:53 am 
Offline
Site Admin

Joined: Sun Mar 14, 2004 3:17 pm
Posts: 4492
Location: Loveland, Colorado, USA
Is this a USB printer? I didn't see anything about USB in the `dmesg`.

You can use `/usr/sbin/lshw` (which will output more as root), or perhaps `usbview` to tell you more info.

-Jeff


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 26, 2005 7:42 am 
Offline

Joined: Thu Sep 30, 2004 3:30 am
Posts: 40
Nope its parallel port

_________________
There is a reason for everything, just look closer.

jBarry


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 27, 2005 10:40 pm 
Offline
Site Admin

Joined: Sun Mar 14, 2004 3:17 pm
Posts: 4492
Location: Loveland, Colorado, USA
Try running xsane as root. Also, lshw find it?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 02, 2005 1:14 am 
Offline

Joined: Thu Sep 30, 2004 3:30 am
Posts: 40
Hi Jebba

I was away from this computer so I was not able to try your suggestion right away....

Anyway..... executing xsane as root yilelded the same result nada! with the additional warning about it is dagerous to run xsane as root.

Also lshw (which is located in /usr/sbin, for those who wish to know) showed up nothing about parallel port. Here is the listing

Code:
ocalhost.localdomain
    description: Computer
    product: 6824IXA
    vendor: IBM
    serial: 99RCC20
    width: 32 bits
    capabilities: smbios-2.31 dmi-2.31
    configuration: boot=oem-specific frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=223AE71E-2B96-2512-B088-40D23E4A3AA8
  *-core
       description: Motherboard
       product: IBM
       vendor: IBM
       physical id: 0
       slot: USB
     *-firmware
          description: BIOS
          vendor: IBM
          physical id: 0
          version: 24KT33AUS (12/02/2002)
          size: 111KB
          capacity: 448KB
          capabilities: pci pnp apm upgrade shadowing escd cdboot edd acpi usb agp ls120boot smartbattery biosbootspecification
     *-cpu
          description: CPU
          product: Intel(R) Pentium(R) 4 CPU 2.40GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: 15.2.7
          slot: WMT478/NWD
          size: 2400MHz
          capacity: 3060MHz
          width: 32 bits
          clock: 133MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid          configuration: id=0
        *-cache:0
             description: L1 cache
             physical id: 5
             slot: L1 Cache
             size: 8KB
             capacity: 16KB
             capabilities: asynchronous internal write-back
        *-cache:1
             description: L2 cache
             physical id: 6
             slot: L2 Cache
             size: 512KB
             capacity: 512KB
             capabilities: burst internal write-back
     *-memory
          description: System Memory
          physical id: 1f
          slot: System board or motherboard
          size: 512MB
          capacity: 2GB
        *-bank:0
             description: DIMM DDR Synchronous
             physical id: 0
             slot: J6J1
             size: 256MB
             width: 64 bits
        *-bank:1
             description: DIMM DDR Synchronous
             physical id: 1
             slot: J6J2
             size: 256MB
             width: 64 bits
     *-pci
          description: Host bridge
          product: 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
          vendor: Intel Corp.
          physical id: d0000000
          bus info: pci@00:00.0
          version: 01
          width: 32 bits
          clock: 33MHz
          resources: iomemory:d0000000-dfffffff
        *-display
             description: VGA compatible controller
             product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
             vendor: Intel Corp.
             physical id: 2
             bus info: pci@00:02.0
             version: 01
             size: 128MB
             width: 32 bits
             clock: 33MHz
             capabilities: vga bus_master cap_list
             resources: iomemory:88000000-8fffffff iomemory:80000000-8007ffff irq:11
        *-usb:0
             description: USB Controller
             product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
             vendor: Intel Corp.
             physical id: 1d
             bus info: pci@00:1d.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd
             resources: ioport:1800-181f irq:11
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.10-1.770_FC3 uhci_hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
        *-usb:1
             description: USB Controller
             product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
             vendor: Intel Corp.
             physical id: 1d.1
             bus info: pci@00:1d.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd
             resources: ioport:1820-183f irq:10
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.10-1.770_FC3 uhci_hcd
                physical id: 1
                bus info: usb@3
                logical name: usb3
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
        *-usb:2
             description: USB Controller
             product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
             vendor: Intel Corp.
             physical id: 1d.2
             bus info: pci@00:1d.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd
             resources: ioport:1840-185f irq:5
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.10-1.770_FC3 uhci_hcd
                physical id: 1
                bus info: usb@4
                logical name: usb4
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
        *-usb:3
             description: USB Controller
             product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
             vendor: Intel Corp.
             physical id: 1d.7
             bus info: pci@00:1d.7
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd
             resources: iomemory:c0080000-c00803ff irq:9
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 2.6.10-1.770_FC3 ehci_hcd
                physical id: 1
                bus info: usb@1
                logical name: usb1
                version: 2.06
                capabilities: usb-2.00
                configuration: driver=hub maxpower=0mA slots=6 speed=480.0MB/s
        *-pci
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corp.
             physical id: 1e
             bus info: pci@00:1e.0
             version: 81
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master
           *-network
                description: Ethernet interface
                product: 82801DB PRO/100 VE (LOM) Ethernet Controller
                vendor: Intel Corp.
                physical id: 8
                bus info: pci@02:08.0
                logical name: eth0
                version: 81
                serial: 00:09:6b:a1:84:60
                size: 100MB/s
                capacity: 100MB/s
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegociation
                configuration: autonegociation=on broadcast=yes driver=e100 driverversion=3.2.3-k2-NAPI duplex=half firmware=N/A ip=10.208.28.122 link=yes multicast=yes port=MII speed=100MB/s
                resources: iomemory:c0100000-c0100fff ioport:2000-203f irq:9
        *-isa UNCLAIMED
             description: ISA bridge
             product: 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge
             vendor: Intel Corp.
             physical id: 1f
             bus info: pci@00:1f.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
        *-ide
             description: IDE interface
             product: 82801DB (ICH4) IDE Controller
             vendor: Intel Corp.
             physical id: 1f.1
             bus info: pci@00:1f.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master
             configuration: driver=PIIX_IDE
             resources: ioport:1860-186f iomemory:20000000-200003ff irq:5
           *-ide:0
                description: IDE Channel 0
                physical id: 0
                bus info: ide@0
                logical name: ide0
                clock: 33MHz
              *-disk
                   description: ATA Disk
                   product: ST340016A
                   vendor: Seagate
                   physical id: 0
                   bus info: ide@0.0
                   logical name: /dev/hda
                   version: 3.19
                   serial: 3HSCVTWL
                   size: 37GB
                   capacity: 37GB
                   capabilities: ata dma lba iordy smart security pm
                   configuration: mode=udma5 smart=on
           *-ide:1
                description: IDE Channel 1
                physical id: 1
                bus info: ide@1
                logical name: ide1
                clock: 33MHz
              *-cdrom
                   description: IDE CD-ROM
                   product: OEM CD-ROM F522E
                   physical id: 0
                   bus info: ide@1.0
                   logical name: /dev/hdc
                   version: 1.04
                   capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy pm audio
                   configuration: mode=udma2
        *-serial
             description: SMBus
             product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
             vendor: Intel Corp.
             physical id: 1f.3
             bus info: pci@00:1f.3
             version: 01
             width: 32 bits
             clock: 33MHz
             configuration: driver=i801_smbus
             resources: ioport:1880-189f irq:9
        *-multimedia
             description: Multimedia audio controller
             product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
             vendor: Intel Corp.
             physical id: 1f.5
             bus info: pci@00:1f.5
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=Intel ICH
             resources: ioport:1c00-1cff ioport:18c0-18ff iomemory:c0080c00-c0080dff iomemory:c0080800-c00808ff irq:9


any thoughts?

regards

_________________
There is a reason for everything, just look closer.

jBarry


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 02, 2005 5:59 am 
Offline
Site Admin

Joined: Sun Mar 14, 2004 3:17 pm
Posts: 4492
Location: Loveland, Colorado, USA
Sry, I don't have time to check it out now and I'm gonna be offline for a couple days. Ping me (by posting whatever else to this thread) in a couple days and I'll check it out again (or else I may ferget).

-Jeff


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 09, 2005 1:38 am 
Offline

Joined: Thu Sep 30, 2004 3:30 am
Posts: 40
PING :D

_________________
There is a reason for everything, just look closer.

jBarry


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 09, 2005 1:41 am 
Offline
Site Admin

Joined: Sun Mar 14, 2004 3:17 pm
Posts: 4492
Location: Loveland, Colorado, USA
oh boy, pong...

you caught me when we're (me & stevo32) jamming out 40k-alpha... Probably not today and I'm gone again tue/wed...

sry, somebody help 'em! ;) Or ping again on thur...

-Jeff


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 09, 2005 1:48 am 
Offline

Joined: Thu Sep 30, 2004 3:30 am
Posts: 40
Hey no hurries its a work scanner that still work in the win machine so no probs, just want to know how to make it work (you know stock knowledge). better spend your time in 40k....

I´ll ping next week

THANKS and MORE POWER

_________________
There is a reason for everything, just look closer.

jBarry


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 18, 2009 12:15 am 
Offline

Joined: Sat Apr 05, 2008 10:41 pm
Posts: 92
Location: Mesoamerica
jBarry wrote:
Hey no hurries its a work scanner that still work in the win machine so no probs, just want to know how to make it work


just in case somebody is interested in this topic, I'm using the FB620 model from CanonScan with no problems in BLAG 9, it's fully supported by sane:
http://www.sane-project.org/lists/sane- ... ml#Z-CANON

Also I have to modify the BIOS configuration to set the I/O mode to EPP, because in the ECP mode the scanner freezes just before starting

here's my mini-howto:

1) Install xsane
2) uncomment (or create) 'canon_pp' in /etc/sane.d/dll.conf
3) uncomment 'init_mode FB620P parport0' in '/etc/sane.d/canon_pp.conf'
4) add my user to 'lp' group and give it execution/write/read permissions in /dev/parport0 ( #chmod g+wrx /dev/parport0 )
5) unplug the scanner power cord for 20secs and plug it again
6) run xsane and enjoy!

My mini-howto in Spanish:
http://sietecoyote.com/2009/07/18/scann ... 0-en-blag/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group