FAQ   Search   Memberlist  
Profile    Log in to check your private messages    Register    Log in
BLAG 3000 Laptop Installation

 
Post new topic   Reply to topic    BLAG Forum Index -> support
View previous topic :: View next topic  
Author Message
Moz32
PostPosted: Mon Apr 25, 2005 7:37 pm    Post subject: BLAG 3000 Laptop Installation Reply with quote

Hi. I'm having a few troubles installing BLAG on my Compaq laptop. It's a Compaq R3320US:

ALPS touchpad
ATI card
Broadcom wifi adapter.

Can someone please help me in enabling/configuring these devices? Thanks.

jebba
PostPosted: Mon Apr 25, 2005 7:55 pm    Post subject: Reply with quote

I don't see it listed here, but there may be a similar laptop:
http://www.linux-on-laptops.com/compaq.html

I'm not sure about the touchpad.

The ATI should work fine. What's the prob? I have an ATI in my laptop & it comes up fine.

The broadcom may be a bit of a problem if they just have proprietary adapters. You can find out its exact model by running:
Code:
/sbin/lspci
/usr/sbin/lshw


It will be easier to figure out how to get it going if we know the model.

-Jeff

Moz32
PostPosted: Mon Apr 25, 2005 11:02 pm    Post subject: hardware info Reply with quote

WARNING: you should run this program as super-user.
localhost.localdomain
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 895MB
*-cpu
product: Intel(R) Pentium(R) 4 CPU 3.00GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 15.3.4
serial: 0000-0F34-0000-0000-0000-0000
size: 18EHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni monitor ds_cpl cid xtpr
configuration: id=0
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 32 bits
capabilities: logical
*-pci
description: Host bridge
product: Radeon 9100 IGP Host Bridge
vendor: ATI Technologies Inc
physical id: d2000000
bus info: pci@00:00.0
version: 02
width: 32 bits
clock: 66MHz
resources: iomemory:d2000000-d3ffffff iomemory:d0000000-d0000fff
*-pci:0
description: PCI bridge
product: Radeon 9100 IGP AGP Bridge
vendor: ATI Technologies Inc
physical id: 1
bus info: pci@00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
*-display
description: VGA compatible controller
product: RS300M AGP [Radeon Mobility 9100IGP]
vendor: ATI Technologies Inc
physical id: 5
bus info: pci@01:05.0
version: 00
size: 256MB
width: 32 bits
clock: 66MHz
capabilities: vga bus_master cap_list
resources: iomemory:e0000000-efffffff ioport:9000-90ff iomemory:d0100000-d010ffff irq:10
*-usb:0
description: USB Controller
product: OHCI USB Controller #1
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@00:13.0
version: 01
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd
resources: iomemory:d0001000-d0001fff irq:11
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.11-1.14_FC3 ohci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=3 speed=12.0MB/s
*-usb:1
description: USB Controller
product: OHCI USB Controller #2
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@00:13.1
version: 01
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd
resources: iomemory:d0002000-d0002fff irq:11
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.11-1.14_FC3 ohci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=3 speed=12.0MB/s
*-serial UNCLAIMED
description: SMBus
product: ATI SMBus
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@00:14.0
version: 16
width: 32 bits
clock: 66MHz
resources: ioport:8040-804f iomemory:48000000-480003ff
*-ide
description: IDE interface
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@00:14.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=ATIIXP_IDE
resources: ioport:8060-806f irq:10
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
product: SAMSUNG MP0603H
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
capacity: 55GB
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-cdrom
product: HL-DT-ST DVD+RW GCA-4040N
physical id: 0
bus info: ide@1.0
logical name: /dev/hdc
capabilities: packet
*-isa UNCLAIMED
description: ISA bridge
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@00:14.3
version: 00
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
*-pci:1
description: PCI bridge
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@00:14.4
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master
*-network:0 UNCLAIMED
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 2
bus info: pci@02:02.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
resources: iomemory:d0200000-d0201fff irq:5
*-network:1
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 3
bus info: pci@02:03.0
logical name: eth0
version: 10
serial: 00:0f:b0:0b:2f:22
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=8139too ip=192.168.2.4 multicast=yes
resources: ioport:a000-a0ff iomemory:d0204000-d02040ff irq:11
*-pcmcia:0
description: CardBus bridge
product: PCI1520 PC card Cardbus Controller
vendor: Texas Instruments
physical id: 4
bus info: pci@02:04.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus
resources: iomemory:48001000-48001fff irq:10
*-pcmcia:1
description: CardBus bridge
product: PCI1520 PC card Cardbus Controller
vendor: Texas Instruments
physical id: 4.1
bus info: pci@02:04.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus
resources: iomemory:48002000-48002fff irq:10
*-usb:0
description: USB Controller
product: USB
vendor: NEC Corporation
physical id: 7
bus info: pci@02:07.0
version: 43
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:d0202000-d0202fff irq:10
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.11-1.14_FC3 ohci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=3 speed=12.0MB/s
*-usb:1
description: USB Controller
product: USB
vendor: NEC Corporation
physical id: 7.1
bus info: pci@02:07.1
version: 43
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:d0203000-d0203fff irq:5
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.11-1.14_FC3 ohci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: USB 2.0
vendor: NEC Corporation
physical id: 7.2
bus info: pci@02:07.2
version: 04
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:d0204400-d02044ff irq:11
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.11-1.14_FC3 ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=5 speed=480.0MB/s
*-multimedia
description: Multimedia audio controller
product: IXP150 AC'97 Audio Controller
vendor: ATI Technologies Inc
physical id: 14.5
bus info: pci@00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ATI IXP AC97 controller
resources: iomemory:d0003000-d00030ff irq:10
*-communication
description: Modem
product: IXP AC'97 Modem
vendor: ATI Technologies Inc
physical id: 14.6
bus info: pci@00:14.6
version: 01
width: 32 bits
clock: 66MHz
capabilities: generic bus_master
configuration: driver=ATI IXP MC97 controller
resources: iomemory:d0003400-d00034ff irq:10


00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01)
00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01)
00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 16)
00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4349
00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c
00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller
00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01)
01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]
02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:04.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:07.0 USB Controller: NEC Corporation USB (rev 43)
02:07.1 USB Controller: NEC Corporation USB (rev 43)
02:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04)

Moz32
PostPosted: Mon Apr 25, 2005 11:04 pm    Post subject: hardware enable Reply with quote

Also, how can I change Screen Resolution? It only gives me two: 640 x 800 and 800 x 600

Also, I can't enable the touchpad functions: tapping and scrolling. Also, the movement is slow.

How do I enable the wifi adapter? thanks.

jebba
PostPosted: Mon Apr 25, 2005 11:25 pm    Post subject: Reply with quote

You probably need to run `system-config-display` and select a monitor that can do greater than 800x600, such as "Generic 1024x768" or whatever size you want.

For the broadcom adapter, you will need to use ndiswrapper. I believe there are some docs on setting up ndiswrapper on the wiki.

Not sure about the touchpad.

Display posts from previous:   
Post new topic   Reply to topic    BLAG Forum Index -> support
Page 1 of 1

Protected by Anti-Spam ACP