|
| View previous topic :: View next topic |
| Author |
Message |
Guest
|
 Posted: Tue Apr 26, 2005 8:09 am Post subject: 1024x768 resolution |
 |
|
I did a blagblagblag install of 3k and can only get a maximum resolution of 800x600.
How can I change this to 1024x768 so I can get the windows to fit better to get to the OK buttons at the bootom of the windows? I hope you know what I mean?
Thanks
|
|
|
 |
jebba
|
| Posted: Tue Apr 26, 2005 8:27 am Post subject: |
|
|
Go to:
Menu->System Settings->Display
In there, hit the "Hardware" Tab, then "Configure" for the monitor. Then select your monitor or "Generic 1024x768" or whatever display size it is that you want.
|
|
|
|
Guest
|
| Posted: Tue Apr 26, 2005 7:58 pm Post subject: reply |
|
|
Jebba, I tried that but was looking for my monitor which was not listed
and I only had 800x600 or 640 x 480 as defaults
I found the generic crt setting for 1024x768 and it added the option to the list of resolutions.
Thanks for getting back to me so quickly
|
|
|
|
crane
|
| Posted: Wed Apr 27, 2005 3:55 am Post subject: Re: reply |
|
|
| Anonymous wrote: | Jebba, I tried that but was looking for my monitor which was not listed
and I only had 800x600 or 640 x 480 as defaults
I found the generic crt setting for 1024x768 and it added the option to the list of resolutions.
Thanks for getting back to me so quickly |
You could find the specs on you monitor (refresh rate) and manually update the xorg file with the new setting.
|
_________________
Crane |
|
|
|
|
|
