I have the following 2 CDROM drives installed in my system:
product: E-IDE CD-ROM CR-852E
physical id: 0
bus info: firstname.lastname@example.org
logical name: /dev/hdc
physical id: 1
bus info: email@example.com
logical name: /dev/hdd
When I start K3B, I get the following warning/error:
No support for ATAPI with cdrdao
You will not be able to use all your reading devices as copy sources since there is at least one not configured to use SCSI emulation and your system does not support ATAPI with cdrdao.
Solution: The best and recommended solution is to enable ide-scsi (SCSI emulation) for all devices. This way you won't have any problems.
Question: How do I enable SCSI emulation for all devices?