FAQ   Search   Memberlist  
Profile    Log in to check your private messages    Register    Log in
Networking disconnected after reboot

 
Post new topic   Reply to topic    BLAG Forum Index -> support
View previous topic :: View next topic  
Author Message
hansencomputers
PostPosted: Wed Mar 19, 2008 9:45 pm    Post subject: Networking disconnected after reboot Reply with quote

Hi,
After a recent update, my ether net connection (eth0) comes up disconnected after rebooting the machine. I am able to Activate the device manually by going to:
SYSTEM-ADMINISTRATION-NETWORK, and then clicking the "Activate" button.

Is there something I can do to make sure eth0 is activated at system startup?

Thanks,
Mike

gr00ve
PostPosted: Thu Mar 20, 2008 9:01 pm    Post subject: Reply with quote

save your networking profile after clicking activate, it should be in the menu under "file".
if it still doesn't come up upon reboot, delete the network adapter or alias.

hansencomputers
PostPosted: Thu Mar 20, 2008 9:53 pm    Post subject: Reply with quote

Thanks for the advice. I first tried just saving the settings, but that did not resolve the problem. I tried your 2nd suggestion of removing the device, and that worked. I added the device back after restarting, and now all is back to normal.

Thanks for the help.

Mike

Display posts from previous:   
Post new topic   Reply to topic    BLAG Forum Index -> support
Page 1 of 1

Protected by Anti-Spam ACP