|
| View previous topic :: View next topic |
| Author |
Message |
attiladehun
|
 Posted: Fri Aug 08, 2008 3:02 pm Post subject: Fail to load module snd_ymfpci |
 |
|
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
ALSA sound/pci/ymfpci/ymfpci_main.c:2392: firmware request failed: -2
BUG: unable to handle kernel paging request at f89e0100
IP: [<f8a03c72>] :snd_ymfpci:snd_ymfpci_interrupt+0x11/0x1c3
*pde = 37813067 *pte = 00000000
Oops: 0000 [#1] SMP
Modules linked in: snd_ymfpci(+) gameport snd_ac97_codec ac97_bus snd_seq_dummy sr_mod cdrom snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss ppdev snd_pcm snd_opl3_lib snd_timer snd_hwdep snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device 8139cp pcspkr snd wmi button k8temp parport_pc floppy 8139too pata_via usb_storage soundcore mii hwmon parport i2c_viapro i2c_core sg pata_acpi sata_via ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 556, comm: modprobe Not tainted (2.6.25.11-libre.97.fc9.i686 #1)
Fedora 9 has no problem with this 10 year old sound card, yet Blag90001 coughs up this interesting tidbit and so I have NO sound. Explanation? Work-around? Solution?
|
|
|
 |
jebba
|
| Posted: Fri Aug 08, 2008 4:26 pm Post subject: Re: Fail to load module snd_ymfpci |
|
|
| attiladehun wrote: | ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
ALSA sound/pci/ymfpci/ymfpci_main.c:2392: firmware request failed: -2
BUG: unable to handle kernel paging request at f89e0100
IP: [<f8a03c72>] :snd_ymfpci:snd_ymfpci_interrupt+0x11/0x1c3
*pde = 37813067 *pte = 00000000
Oops: 0000 [#1] SMP
Modules linked in: snd_ymfpci(+) gameport snd_ac97_codec ac97_bus snd_seq_dummy sr_mod cdrom snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss ppdev snd_pcm snd_opl3_lib snd_timer snd_hwdep snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device 8139cp pcspkr snd wmi button k8temp parport_pc floppy 8139too pata_via usb_storage soundcore mii hwmon parport i2c_viapro i2c_core sg pata_acpi sata_via ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 556, comm: modprobe Not tainted (2.6.25.11-libre.97.fc9.i686 #1)
Fedora 9 has no problem with this 10 year old sound card, yet Blag90001 coughs up this interesting tidbit and so I have NO sound. Explanation? Work-around? Solution? |
This looks like the key line:
| Quote: | | sound/pci/ymfpci/ymfpci_main.c:2392: firmware request failed: |
I didnt confirm on the list, but it looks like that card may require non-free software to be loaded to run.
|
|
|
|
attiladehun
|
| Posted: Fri Aug 08, 2008 4:57 pm Post subject: |
|
|
Seems that some sort of firmware is needed. I compiled alsa-firmware and installed it and sound is back. Strange that gNewsense would support the card and blag would not.
|
|
|
|
jebba
|
| Posted: Fri Aug 08, 2008 5:06 pm Post subject: |
|
|
| attiladehun wrote: | | Seems that some sort of firmware is needed. I compiled alsa-firmware and installed it and sound is back. Strange that gNewsense would support the card and blag would not. |
SND_YMFPCI - Yamaha YMF724/740/744/754
Yes, it was removed. This file is nearly all hex: ymfpci_image.h
It probably shouldn't be in gnewsense either. Maybe you had the firmware installed and gnewsense loaded it from that? Anyway, you may want to ask them about that as I doubt they would want it in there.
|
|
|
|
|
|
|
